Atlantic Technology 10 CSB 사용 설명서 - 페이지 3
{카테고리_이름} Atlantic Technology 10 CSB에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic Technology 10 CSB 12 페이지. Corner subwoofer
Atlantic Technology 10 CSB에 대해서도 마찬가지입니다: 제품 정보 시트 (2 페이지)
페이지 인쇄
Instruction Manual
10 CSB Subwoofer Rear Panel
Figure 1
11
12
13
Variable Level Control
1
Use this control to set the level of bass
desired
Status LED
2
This will be green for "on" condition,
amber for "standby"
3
Low Level Input
This is the preferred input to connect to
the subwoofer or LFE line out from your
receiver/processor.(pgs 5 and 6)
Low Pass Control
4
An adjustable (40Hz to 140Hz) @ 18dB/
octave low-pass crossover.(pgs 5 and 9)
Low Pass Switch
5
When in the NORMAL position, adjust-
ment of the crossover can be made by
the Crossover Control. If being fed a pre-
filtered or THX signal,place the switch at
the BYPASS position.(pgs 5 and 9)
LEVEL
MIN
FREQ
50
PHASE
0
+
RIGHT
110-120V
220-240V
POWER
WARNING: SHOCK HAZARD-DO NOT OPEN
AVIS:RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR
ON
OFF
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE
THIS APPLICANCE TO RAIN OR MOISTURE. NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
110-120VAC ~ 60H z
FUSE 115,T2AL/250V
220-240VAC ~ 50H z
FUST 230V,T1.25AL/250V
180WATT S
Phase Control
6
This switch allows precise acoustic
matching with satellite speaker systems
whose output may be phase reversed.
(pgs 5 and 10)
Standby Switch
7
When in ON position, the amplifier will
always be on. When in the AUTO posi-
tion, the amplifier will be in Automatic
Standby Mode.When in the OFF position,
the amplifier is muted.(pages 5 and 9)
High Level Input
8
Use this input if your receiver/processor
lacks a line-level output, or if you have
some other reason to do so.(pgs 5 and 8)
High Level Output
9
If using the high level input,you may con-
nect your right and left satellites here.This
output has a high-pass filter to help avoid
overdriving of satellites.(pgs 5 and 8)
STATUS
L/MONO
LOW
MAX
LEVEL
RIGHT
NORMAL
BYPASS
160
LOWPASS
OFF
AUTO
ON
STDBY
180
INPUT
HIGH
LEVEL
OUTPUT
-
-
+
L/MONO
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
NOTE: Your amplifier's
appearance may differ
slightly from illustration
Product Model and Serial Number
10
Write this number in the space provided
on page 2 for future reference.
Voltage Select Switch
11
Voltage switch for use in different coun-
tries. This switch will be set when you
receive the unit. Change this setting
only when you are sure your application
requires it. For US, the switch should be
set to the 110-120V position.
On/Off Switch
12
Use this switch to turn the amplifier com-
pletely on or off.
AC Input and Fuse Holder
13
Use the included power cord to connect
your amplifier to a wall outlet. (pgs 5
and 6)
3
Subwoofer Rear Panel
1
2
3
4
5
6
7
8
9
10