Atlantic Technology 162 PBM 사용 설명서 - 페이지 6
{카테고리_이름} Atlantic Technology 162 PBM에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic Technology 162 PBM 13 페이지. High performance subwoofer
페이지 인쇄Model 162 PBM High Performance Subwoofer
Example 3:
Speaker Out/
High Level In
This is the most
common method
for connecting a
subwoofer to a
system without a
dedicated sub-
woofer line out or
Preamp outputs.
It is important to observe polarity while making speaker connections: red (+) terminals
on the amplifier to red (+) on the speaker, black (-) on the amplifier to black (-) on the
speaker. Look carefully at the wires you are using and note that one of the wires in each
pair is marked by either a different color, printing, ridges, or a thread intertwined with
the wire strands. By convention, the marked wire is connected to the red (+) terminal.
Voltage Selection
The Atlantic Technology subwoofers operate with either 120 or 240 volts AC 50-60 Hz.
Please make sure that the voltage selector switch shows the correct voltage for your
Figure 2:
The fuse is
located next
to the IEC
AC socket
Insert
screwdriver
tip here
Left Front Speaker
area before plugging the unit in. The voltage can be
easily changed by moving the switch to the correct
voltage in your area and installing the proper fuse and
power cord. To change the fuse, remove the power
cord, insert a screwdriver tip into the notch in the side
of the fuseholder, and pry the fuse out. Replace with
the correct value fuse as marked next to the fuseholder,
and push back into place.
Receiver/Amplifier
Main Speakers
Left
Right
LO-LEVEL
INPUT
IN
THRU
L/MONO
HI-LEVEL
THRU
INPUT
RIGHT
Sub Woofer
6
A
tlantic
TECHNOLOGY
Right Front Speaker