Atlantic Technology 8200 THX Ultra 2 사용 설명서 - 페이지 12

{카테고리_이름} Atlantic Technology 8200 THX Ultra 2에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlantic Technology 8200 THX Ultra 2 20 페이지. Pedestal subwoofer systems

페이지 인쇄

Atlantic Technology 8200 THX Ultra 2 사용 설명서

Connecting Your PedWoofers

Remote Control Connections

Figure 13

��

�

� � � � � � � � �

�

� � �

�

� � � � � �

��

�

��

Power Connection

Connect the amplifier's power cord to an AC outlet only after making all

other connections to the PedWoofer system. This will avoid any chance

of accidentally activating the subwoofers while wiring. DO NOT PLUG

THE AMPLIFIER INTO THE SWITCHED OUTLET OF AN AMPLI-

FIER,PREAMPLIFIER,OR RECEIVER. The power demands of the SA

amplifiers is substantial and will exceed the power rating of the switched

outlet and may damage the equipment. Be sure that the printed voltage

rating on the back of the amplifier is correct for your location.

The PedWoofer amplifier system is totally automatic in its operation.

Once the main power switch on the front of the amplifier has been

turned on, the automatic on/off circuitry will activate the amplifier in

the presence of an audio signal from your system. After 7-10 minutes

with no signal detected from the rest of the system, the amplifier will

return to the Standby mode.When the amplifier is active,the power LED

located on the front will glow green.The power LED will switch to yellow

in the Standby mode.Power consumption in Standby mode is negligible.

��

�

��

�

��

AVIS: RISQUE DE CHOC ELECTRIQUE / NE PAS OUVRIR

��

� ��

��

�

��

WARNING

RISK OF ELECTRIC SHOCK

DO NOT OPEN

When you leave for long period of time, (vacation, weekend away, etc.)

we recommend shutting off the main power switch on the front panel

of the amplifier.

IMPORTANT NOTE: The amplifier includes an automatic protec-

tion circuit against overheating, overcurrent or short circuiting of the

speaker wires. Should any of these conditions occur, the amplifier

will stop operating and the ON/STDBY LED will turn red. If this hap-

pens, turn the main power off and check to make sure that there

are no misconnections or shorted connections between the amplifier

and the PedWoofers. After waiting 10-15 minutes for the amplifier

to cool, turn the unit back on. If the amplifier shuts off again, con-

tact your dealer or Atlantic Technology for more information.

The amplifiers generate a fair amount of heat.The louder you play them

the hotter they will become. It is very important to make sure nothing

blocks the ventilation openings on the top and bottom of the unit. Do

not place the amplifier of thick carpeting as the carpet will block the

ventilation holes on the bottom of the unit, restricting airflow through

the interior.

8200/6200 Pedestal Subwoofer System

��

�

��