Electrolux ICON RH36WC60GS 사용 및 관리 매뉴얼 - 페이지 35

{카테고리_이름} Electrolux ICON RH36WC60GS에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ICON RH36WC60GS 44 페이지. 30” et 36” hotte aspirante
Electrolux ICON RH36WC60GS에 대해서도 마찬가지입니다: 사양 (2 페이지), 공장 부품 카탈로그 (4 페이지), 설치, 사용 및 관리 매뉴얼 (21 페이지), 설치, 사용 및 관리 매뉴얼 (22 페이지), 설치, 사용 및 관리 매뉴얼 (22 페이지), (영어) 설치, 사용 및 관리 가이드 (22 페이지), (프랑스어) 설치, 활용 및 사용 설명서 (22 페이지)

페이지 인쇄
Electrolux ICON RH36WC60GS 사용 및 관리 매뉴얼
Installing the hood
Making the electrical connections
Metal electrical
conduit
WARNING
Electrical Shock Hazard
Warning: Turn off at the service panel before wiring
this unit.
120 V AC, 15 or 20 Amp circuit required.
ELECTRICAL GROUNDING INSTRUCTIONS
THIS APPLIANCE IS FI-I-rED WITH AN ELECTRICAL
JUNCTION BOX WITH _, WIRES, ONE OF WHICH
6GREEN/YELLOWl _ SERVES TO GROUND THE
APPLIANCE. TO PROTECT YOU AGAINST
ELECTRIC SHOCK, THE GREEN AND YELLOW
WIRE MUST BE CONNECTED TO THE
GROUNDING WIRE IN YOUR
HOME ELECTRICAL SYSTEM, AND IT MUST
UNDER NO CIRCUMSTANCES BE CUT OR
REMOVED.
Failure to do so can result in death or electrical
shock.
•
Remove junction box cover and knockout on the
top left side.
Knockout
Junction box
cover
House
wiring
UL listed
wire nut
•
Run black (live), white (neutral), and green
(earth) wires (#14 AWG) according to the
National Electrical Code or CSA Standards and
local codes and ordinances in 1/2" conduit from
power supply to junction box.
°
Connect black, white, and green wires from
power supply to black, white, and green/yellow
wires in junction box respectively.
•
These connections should be done always
making reference to the electrical diagram found
inside the hood.
•
Close junction box cover and reapply screws.
If not already done, install 1/2" conduit connector
in junction box.
NOTE: This connector is not included with vent
hood.