Electrolux ICON RH36WCT6GS 사용 및 관리 매뉴얼 설치 지침 - 페이지 14
{카테고리_이름} Electrolux ICON RH36WCT6GS에 대한 사용 및 관리 매뉴얼 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ICON RH36WCT6GS 20 페이지. 36" glass canopy wall-mount hood
Electrolux ICON RH36WCT6GS에 대해서도 마찬가지입니다: 공장 부품 카탈로그 (4 페이지), 제품 사양 (2 페이지)
페이지 인쇄
14
Installation
Install filters
(DUCTED AND NON-DUCTED HOODS)
1. To remove the GREASE filters, pull the metal latch
tab outside and unlock the filter.
2. To install the GREASE filters, align rear filter tabs
with slots in the hood. Depress the metal latch tab,
push filter into position and release. Make sure
filter is securely engaged after installation.
NOTE
Prior to use, remove protective film from the
filter frame.
(NON-DUCTED HOODS ONLY)
1. To remove the CHARCOAL filter, push in on the
front filter latch. Pull the filter down to disengage
the rear filter tabs.
2. To install the CHARCOAL filter, align the rear filter
tabs with slots in the hood. Push the filter up into
place until the front latch snaps securely into the
slot. Make sure the filter is securely engaged after
assembly.
3. Install GREASE filters after charcoal filter is in-
stalled.
GREASE FILTERS
LATCH
TABS
NON-DUCTED
RECIRCULATION
FILTER