Electrolux ICON RH36WCT6GS 사용 및 관리 매뉴얼 설치 지침 - 페이지 9
{카테고리_이름} Electrolux ICON RH36WCT6GS에 대한 사용 및 관리 매뉴얼 설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ICON RH36WCT6GS 20 페이지. 36" glass canopy wall-mount hood
Electrolux ICON RH36WCT6GS에 대해서도 마찬가지입니다: 공장 부품 카탈로그 (4 페이지), 제품 사양 (2 페이지)
페이지 인쇄
Install mounting bracket
1. Construct wood wall framing that is flush with inte-
rior surface of wall studs.
Make sure:
a) the framing is centered over installation loca-
tion.
b) the height of the framing will allow the mounting
bracket to be secured to the framing within the
dimensions shown.
2. After wall surface is finished, secure mounting
bracket to framing using dimensions shown.
FRAMING BEHIND DRYWALL
37"= bottom of hood 24" above cooktop
43"= bottom of hood 30" above cooktop
Install flue mounting bracket
DUCTED AND NON-DUCTED
1. Assemble the flue mounting bracket, adjusting
outside width as shown.
2. Carefully center the mounting bracket directly over
the range hood location.
3. Secure the bracket assembly to the ceiling using (2)
4.8x38mm mounting screws and drywall anchors.
Make sure the bracket is pushed into the corner,
tight against the wall and centered over the hood.
FLUE MOUNTING BRACKET
FLAT HEAD BRACKET SCREWS
10-5/8"
(270.4 mm)
Installation
3.9 x 6 mm
9