Electrolux IUSL1065CN 사용자 설명서 - 페이지 6

{카테고리_이름} Electrolux IUSL1065CN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux IUSL1065CN 29 페이지.

페이지 인쇄

www.electrolux.com

4. CONTROLS

Button

Function

Brief pressure: Activates/Deactivates the button pad

functions. All the buttons light up white.

If the motor is ON, it turns the motor off and leaves the

button pad functions active.

If the motor is OFF, the button pad remains active for

1 minute.

Pressed for 3 Seconds (Motor = Off): Activates/Deactivates

the button pad lock. For example to allow cleaning of the

Glass without activating any functions.

Activates speed one.

Activates speed two.

Activates speed three.

Activates Intensive 1 speed for 10 minutes. At the end

of this time the system will automatically return to the

speed set before. It is disabled by changing speed or

pressing button A.

Press and hold for approximately 3 seconds to Enable /

Disable the Activated Charcoal Filter alarm (Motor = Off).

Activates Intensive 2 speed for 5 minutes. At the end

of this time the system will automatically return to the

speed set before. It is disabled by changing speed or

pressing button A.

Activates BREEZE speed for 60 minutes. At the end of

this time the motor switches off. It is disabled by changing

speed or pressing button A.

Filter alarm button.

This button is normal off. It is only displayed when the

filter alarm is triggered. The alarm can be reset by press-

ing and holding this button for approximately 3 seconds

(Motor = Off).

H2H indicator button.

This button is normally off. It is only displayed when the

hob is connected to the Hood.

Press briefly: Turns the lighting system on and off at

maximum intensity.

Press and hold to change the lighting intensity up or down. -

Display

Active: All the buttons flash.

Inactive: Buttons remain lit for 1

minute.

The button turns from white to red.

H flashes 5 times.

The button turns from white to red.

Button H fixed (30 seconds): indicates

the need to wash the metal grease

filters. The alarm is triggered after

the Hood has been in operation for

40 working hours.

Button H flashing (30 seconds): indi-

cates the need to change the activated

charcoal filters, and also to wash

the metal grease filters. The alarm

is triggered after the Hood has been

in operation for 160 working hours.

The button turns red.