AirTech AQ-40B 사용자 설명서 - 페이지 2

{카테고리_이름} AirTech AQ-40B에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. AirTech AQ-40B 6 페이지. Fm handheld transceiver

APPROVAL
1. FCC Approval
FCC ID :
1) Safety Training Information
Your
FM
Handheld
Transceiver
electromagnetic energy during transmit mode. This radio is
designed for and classified as "Controlled Exposure /
Occupation Environment", meaning it must be used only
during the course of employment by individuals aware of the
hazards, and the ways to minimize such hazards. This radio
is NOT intended for use by the "General Population /
Uncontrolled Environment.
This radio complies with FCC RF radiation exposure limits
set forth for a controlled environment. This radio should be
installed and operated with a minimum distance of 2.5
centimeters between the radio and your body. Therefore, to
ensure that your exposure to RF electromagnetic energy is
within the FCC allowable limits for occupational use, always
follow below information.
Do not operate the radio without a proper antenna as this
may damage the radio and may also cause you to exceed
FCC RF exposure limits. A proper antenna is the antenna
supplied with this radio by the manufacturer or an antenna
specifically authorized by the manufacturer for use with this
radio.
Do not transmit for more than 50% of total radio use time
("50% duty cycle"). Transmitting more than 50% of the time
can cause FCC RF exposure compliance requirements to be
exceeded.
generates
RF
Always use Airtech supplied accessories (antennas, batteries,
belt clips, speaker/mics, etc.).
accessories can cause the FCC RF exposure compliance
requirements to be exceeded.
Always keep the antenna at least 2.5 cm (1 inch) away from
the body when transmitting and only use the belt-clips, when
attaching the radio to your belt, etc., to ensure FCC RF
exposure compliance requirements are not exceeded.
2) LABEL
This radio complies with the FCC RF exposure
limits for Occupational Use Only.
Use of unauthorized
3