Dri-Eaz DefendAir HEPA 500 소유자 매뉴얼 - 페이지 5
{카테고리_이름} Dri-Eaz DefendAir HEPA 500에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Dri-Eaz DefendAir HEPA 500 5 페이지. Air scrubber
Dri-Eaz DefendAir HEPA 500에 대해서도 마찬가지입니다: 소유자 매뉴얼 (6 페이지), 소유자 매뉴얼 (5 페이지)
페이지 인쇄TROUBLESHOOTING
PROBLEM
Unit does not operate
Change light illuminated
For any problems not described here, please contact your local distributor for assistance.
SPECIFICATIONS
Model
HEPA 500 (F284-230V)
Weight
19.9 kg | 44 lbs.
Dimensions
62.5 × 66.5 × 46.2 cm
(D × W × H)
24.6 × 26.2 × 18.2 in.
Duct sizes
Intake: 12 in. Outlet: 8 in.
Power
1.5A, 230V, 50 Hz
Air movement
331–431 CFM
Filter system
Up to two prefilters and one HEPA filter.
Controls
On/Off switch, variable speed control knob
Power cord length
7.63 m | 25 ft.
Construction
Rotomolded polyethylene housing
Safety
CE listed
Specifications are subject to change without notice. Some values
may be approximate.
07-02068A F284-230V AU
LIRE ET CONSERVER CES INSTRUCTIONS
CAUSE
1.
No power to machine
2.
Switch not turned on
3.
No power at supply outlet
4.
GFCI tripped
1.
Primary (HEPA) filter is full
2.
Air intake restricted by ducting
bends, kinks, or excessive
length
SOLUTION
1.
Plug in the unit; check power at outlet
2.
Turn on the switch
3.
Reset supply circuit breaker/GFCI
4.
Reset unit circuit breaker/GFCI
1.
Replace the HEPA filter
2.
Eliminate bends/kinks in ducting; reduce ducting
length.
5
Dri-Eaz Products, Ltd.