Electrolux LFP216S 사용자 설명서 - 페이지 4

{카테고리_이름} Electrolux LFP216S에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux LFP216S 8 페이지.
Electrolux LFP216S에 대해서도 마찬가지입니다: 설치 매뉴얼 (16 페이지)

페이지 인쇄

Charcoal filter

4.2 Cleaning the grease filter

Filters are mounted with the use of clips and

pins on the opposite side.

To clean the filter:

1. Press the handle of the mounting clip on

the filter panel underneath the hood (1).

2. Slightly tilt the front of the filter

downwards (2), then pull.

Repeat the first two steps for all filters.

3. Clean the filters using a sponge with non

abrasive detergents or in a dishwasher.

The dishwasher must be set to a low

temperature and a short cycle. The

grease filter may discolour, it has no

influence on the performance of the

appliance.

4. To mount the filters back follow the first

two steps in reverse order.

Repeat the steps for all filters if applicable.

4.3 Replacing the charcoal filter -

optional

WARNING!

The charcoal filter is NON-washable! The

filter cannot be regenerated!

To replace the charcoal filter:

ENGLISH

The time of saturation of the charcoal filter varies depending on the type of cooking and

the regularity of cleaning the grease filter. The activated charcoal filter is not washable,

cannot be regenerated and must be replaced approximately every 4/6 months of opera‐

tion, or more frequently for particularly heavy usage.

1. Remove the grease filters from the

appliance.

Refer to "Cleaning the grease filter" in this

chapter.

2. Turn the filter counterclockwise (1) and

then pull (2).

To mount the filters back follow the steps in

reverse order.

In any case, it is necessary to replace the

filters at least every four months.

4.4 Replacing the lamp

WARNING!

Risk of burns and electric shock!

Disconnect the appliance from the

electricity before the operation! Make

sure that the light bulb has cooled down

before touching it.

WARNING!

Risk of injury! Use protective gloves to

replace the lamp.

Risk of damage to the appliance! Do not

use sharp edged tools!

Replace the burnt light bulb in accordance

with the specifications:

Power (W)