Bosch KSF Series 사용 설명서 지침 - 페이지 16
{카테고리_이름} Bosch KSF Series에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch KSF Series 22 페이지.
페이지 인쇄en
Fault
The "cool-fresh"
compartment is too warm or
too cold.
Appliance is not cooling,
temperature display and light
are lit.
16
Possible cause
The standard setting has
been set too high or too low
(e.g. if there is frost
in the "cool-fresh"
compartment).
Showroom mode is
switched on.
Remedial action
The temperature in the "cool-fresh"
compartment can be set to be 3 steps warmer
and/or colder, Fig. ". If the refrigerator
compartment temperature is set to 0,
the "cool-fresh" compartment has
a temperature of almost 0 °C.
1. Hold down "super" button 2 for 3 seconds
until temperature display 4 flashes.
2. Change the setting using the temperature
setting button 3.
Setting -3 corresponds to the coldest
setting
Setting +3 corresponds to the warmest
setting
The selected setting is saved after one
minute.
Hold down alarm button, Fig "/5, for
10 seconds until an acknowledgement signal
sounds.
After a short time check whether your
appliance is cooling.