Electrolux RH30WC55GS 설치, 사용 및 관리 매뉴얼 - 페이지 19

{카테고리_이름} Electrolux RH30WC55GS에 대한 설치, 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux RH30WC55GS 21 페이지. 30” et 36” hotte aspirante
Electrolux RH30WC55GS에 대해서도 마찬가지입니다: 공장 부품 카탈로그 (4 페이지), 브로셔 및 사양 (2 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), (영어) 설치, 사용 및 관리 가이드 (25 페이지), (프랑스어) 설치, 활용 및 사용 설명서 (21 페이지)

Electrolux RH30WC55GS 설치, 사용 및 관리 매뉴얼
Care and cleaning

Optional Charcoal Filters

If the model is not vented to the outside, the air will be recirculated through disposable charcoal
lters that help remove smoke and odors.
The charcoal lters cannot be cleaned.
They must be replaced.
The charcoal lters are clipped inside of each metal grease lter (mounting instructions included with
charcoal lter kit).
The charcoal lters should be replaced every 4-6 months (depending on hood usage).
NOTE: DO NOT rinse, or put charcoal lters in an automatic dishwasher.
NOTE: Charcoal lters are not included with the hood.
They must be ordered from your supplier.
Order the needed kit specifying your hood model and width size.

Charcoal lter placement (Recirculating accessories)

Fit the charcoal lter mattress on the upper side of each grease lter.
Use provided springs to x it in place.
NOTE: When removing for replacing for a new one do not remove Fixing Springs, simply pull out and
rotate outwards.

Cleaning

Always use the mildest cleaner that will do the
job. Use clean, soft cloths, sponges or paper
towels.
grain. Wipe area dry to avoid water marks.
After cleaning, place all parts in their proper
positions before using.
The cleaners recommended below indicate a type
and do not constitute an endorsement. Use all
products according to package directions.

Hood Surface

Painted Surfaces: For general care, wipe the outside
of the hood with sudsy water or household cleaners
such as Fantastic
or Formula 409
®
with a clean soft cloth to avoid water marks.
Stainless Steel Surfaces: Wipe and dry stainless
steel in the same direction as the grain. Avoid using
too much pressure, which may mar the surface. To
cleaners such as Stainless Steel Magic. Do not allow
any cleaning compounds to remain in contact with
stainless steel for extended periods.
Plastic surfaces: Wipe with a moist soapy sponge.
Rinse and dry.
Aluminum Mesh Filters:
washer or by agitating in sudsy water. Ensure that
Anodized Aluminum surfaces: Top cap is not remov-
able. Wash top and underside with hot sudsy water.
, rinse well and dry
Rinse and wipe dry or apply Fantastic
®
409
wipe clean. DO NOT USE powdered cleaners or
steel wool pads.
®
19
or Formula
®