Electrolux RH36PC60GSB 사용 및 관리 매뉴얼 - 페이지 31
{카테고리_이름} Electrolux RH36PC60GSB에 대한 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux RH36PC60GSB 42 페이지. 36" and 42" island range hood
Electrolux RH36PC60GSB에 대해서도 마찬가지입니다: 설치, 사용 및 관리 매뉴얼 (21 페이지)
페이지 인쇄
Installing the hood
'i,
\\
/
Place the template on to ceiling considering
the instructions for ceiling support
structures. Always consider the "front of
hood" legend when placing the template
on the ceiling. It will dene the control's
location.
j J-
Mark with a pencil the hole locations for
screws in the ceiling.
Remove template.
_y
_y_ ------ ----- J
Secure
the upper horizontal
support
with
4 wood screws.
Place the hood over a table protecting the glass Attach the
4 lower vertical supports (A) to the hood with 16 assembly
screws (4 per corner). Then attach the lower horizontal support
(B) with 8 assembly screws (2 per corner).
The upper vertical supports' position will determine the hood's total height.
Refer to the maximum and minimum extensions line drawing to determine
which is the most suitable dimension according to your ceiling's height.
Always take into consideration the minimum installation heights declared in
this manual. Position the upper vertical supports (C) at the proper height and
attach them with 16 assembly screws (4 per corner).
Carefully lift the assembly until the upper vertical supports are locked
with the 4 upper horizontal support's springs. Secure with 16 assembly
screws (4 per corner).
Note: At least 2 persons are needed for this operation.
Attach the stainless steel duct cover
supports using 4 assembly screws.