Electrolux RH36WC55GS 설치, 사용 및 관리 매뉴얼 - 페이지 11

{카테고리_이름} Electrolux RH36WC55GS에 대한 설치, 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux RH36WC55GS 20 페이지. 30” et 36” hotte aspirante
Electrolux RH36WC55GS에 대해서도 마찬가지입니다: 공장 부품 카탈로그 (4 페이지), 브로셔 및 사양 (2 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), 설치, 사용 및 관리 매뉴얼 (20 페이지), (영어) 설치, 사용 및 관리 가이드 (25 페이지), (프랑스어) 설치, 활용 및 사용 설명서 (21 페이지)

• Remove the hood.

• Drive "lower" wood screws, by hand. Remove

screws.

• Mount the hood onto the "upper" screws.

• Drive and tighten the "upper" wood screws, by

hand.

• Drive and tighten the "lower" wood screws, by

hand.

Connecting the ductwork

• Install ductwork, making connections in the

direction of airflow as illustrated.

• Push duct over the exhaust outlet.

• Wrap all duct joints and the flange connections

with duct tape for an airtight seal.

• Make the same connection in the wall or ceiling

vent exit.

Duct tape

over seam

Air deflector installation

(Recirculating accessories)

(Recir

• Assemble the air deflector with the duct cover

• Measure from the bottom of the air deflector to

Airflow

• Cut the duct at the measured size.

• Uninstall the air deflector removing the 4

• Slip the duct onto the bottom of the deflector.

• Place the assembled deflector and duct over the

• Assemble the air deflector to the duct cover

Installing the hood

culating accessories)

bracket with 4 assembly screws provided as

shown.

the bottom of the hood outlet, as shown.

Dimension to measure

assembly screws.

exhaust outlet from the hood.

bracket with 4 assembly screws provided as

shown.