Electrolux RH36WC55GSB 설치, 사용 및 관리 매뉴얼 - 페이지 11

{카테고리_이름} Electrolux RH36WC55GSB에 대한 설치, 사용 및 관리 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux RH36WC55GSB 21 페이지. 30" and 36" free-standing range hood

Remove the hood.

Drive "lower" wood screws, by hand. Remove

screws.

Mount the hood onto the "upper" screws.

Drive and tighten the "upper" wood screws, by

hand.

Drive and tighten the "lower" wood screws, by

hand.

Connecting the ductwork

Install ductwork, making connections in the

direction of air ow as illustrated.

Push duct over the exhaust outlet.

Wrap all duct joints and the ange connections

with duct tape for an airtight seal.

Make the same connection in the wall or ceiling

vent exit.

Installing the hood

Air de ector installation

(Recirculating accessories)

(Recir

culating accessories)

Assemble the air de ector with the duct cover

bracket with 4 assembly screws provided as

shown.

Measure from the bottom of the air de ector to

the bottom of the hood outlet, as shown.

Cut the duct at the measured size.

Uninstall the air de ector removing the 4

assembly screws.

Slip the duct onto the bottom of the de ector.

Place the assembled de ector and duct over the

exhaust outlet from the hood.

Assemble the air de ector to the duct cover

bracket with 4 assembly screws provided as

shown.

11 11