16 www.electrolux.com
Drawers fitted with telescopic slides
To remove the drawer for cleaning.
1. Empty food from the drawer.
2. Remove the drawer by pulling it forward and
lifting the front to unhook it from the slides.
Once you have removed the drawer, ensure
the slides are pushed back so they are fully
closed.
WARNING
Never close the door while the telescopic slides
are extended. This may damage the slide and/or
refrigerator or cause the slide to become
disengaged from the refrigerator.
To replace the drawer:
1. Ensure the telescopic slides are pushed in all
the way.
2. Slide the drawer into place over the slides
and push the bin in until it stops.
3. Drop drawer into position.
CAUTION
Never close the door while the telescopic slides
are extended. It may damage the slide and/or
the refrigerator or cause the slide to become
disengaged from the refrigerator.
Twist and Serve Ice
Mounting the twist & serve dispenser to the other
side of the freezer.
Note : This is only possible on top mount models.
1.
Remove the ice
bin and ice cube
tray. If the ice tray
assembly is frozen to
the carriage, simply
squeeze the tray
and shelf together to
break the ice.
2.
Before you remove the ice carriage,
remember to disengage it from the glass shelf
as it may result in damage to the assembly.
3.
Remove the centre runner by disengaging it at
the front of the shelf, and removing it from the
rear.
Insert Into the slot at the rear
of the shelf
Then engage Into the front
of the shelf
4.
Refit the runner into the rear of the shelf on
the right hand side and then engage the
front.
5.
Fit the carriage by sliding it into the runners
until the front if the carriage engages with
the shelf.
6.
Refit the ice tray and ice bin.
WARNING
Fill the ice tube tray with potable water only.
CAUTION
LED lighting
Your appliance is fitted with long life LED
lighting. In the unlikely event the LED lights
should fail, then the LED lights should be serviced
by the manufacturer.
Refer to the warranty page for contact details.
페이지 인쇄