Electrolux WEGL1030CN 사용자 설명서 - 페이지 8
{카테고리_이름} Electrolux WEGL1030CN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WEGL1030CN 48 페이지.
페이지 인쇄
www.electrolux.com
8
5. INSTALLATION
Wall drilling and bracket fixing
Wall marking:
• Rest the Bracket 7.2.1 as indicated 1-2
mm from the ceiling or top limit.
• Mark the centres of the Bores in the
Bracket.
• Rest the Bracket 7.2.1 as indicated X mm
under the first bracket (X = height of the
Top Chimney provided).
• Mark the centres of the Bores in the
Bracket.
• Rest the Hood Coupling Support 7.1 as
indicated 1004 mm above the Cooker
Top, checking that the fixing bores are
equidistant from the corner of the wall.
• Mark the centres of the Bores in the Sup-
port.
• Drill the points marked with a ø 8 mm drill
bit.
• Insert the plugs 11 into the holes.
• Draw a Horizontal line on the Wall 668
mm above the Cooker Top.
12r
11
12a
11
7.2.1
12a
7.4
7.3
12a
11
7.1
7.5
• Rest the Safety Brackets 7.5 as indicated
on the reference Horizontal line, at a dis-
tance of 958 mm from the corner of the
wall, checking that they are level.
• Mark the centres of the Bores in the Safe-
ty Brackets.
• Drill the points marked with a ø 8 mm drill
bit.
• Insert the plugs 11 into the holes.
• Fix the Brackets and the Support, using
the Screws 12a (4.2 x 44.4) provided.
• In case of recycling version installation,
you should fix the upper bracket 7.2.1, the
holder 7.4, the bracket 7.3 to the holder
7.4 and the recycling connector 15 to the
bracket 7.3.
• Fasten 2 Screws 12r (4.2 x 12.7) provided
into the Hood Canopy fixing holes, posi-
tioned on the front plate of the Hood Cou-
pling Support, leaving a space of 5-6 mm
between the sup-port and the head of the
screw.
958
958
1÷2