DRIFT HD 사용자 설명서 - 페이지 6

{카테고리_이름} DRIFT HD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRIFT HD 19 페이지.
DRIFT HD에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄

mounting the camera

The Drift HD can be mounted in a different number of ways using the mounts

provided:

Fixing the Camera onto the Universal Clip

1. Align the screw of the universal clip with the thread on the underside of the camera

body.

2. Twist the screw thread in a clockwise direction.

3. As the universal clip tightens against the body of the camera, rotate the universal

clip to provide the desired angle of attachment.

4. Tighten the screw on the universal clip until the clip fits firmly against the camera

body.

Mounting the Camera on a Goggle Mount

1. Attach the goggle mount to the strap of your goggle.

2. Slide the camera (with universal clip attached) into the goggle mount until the two

arms on the clip 'click' into place.

Mounting the Camera on a helmet

1. Position the helmet mount against your helmet to find the optimum mounting

position.

2. Ensure the surface you wish to attach the helmet mount to is clean, dry and free of

oil and dust. Attach the remaining velcro strip onto the helmet.

3. Adhere the mount to the helmet using the 3M VHB adhesive provided. Allow 24

hours to cure.

4. Slide the camera (with universal clip attached) into the helmet mount until the two

arms on the clip 'click' into place.

Mounting the Camera on a Vented Cycle- or Kayak helmet

1. Position the helmet mount on the top or side of your helmet to find the optimum

mounting position.

2. Thread the velcro strap through the slits in the helmet mount to attach it to the

helmet.

3. Slide the camera (with universal clip attached) into the helmet mount until the two

arms on the clip 'click' into place.

Mounting the Camera onto a Tripod, Monopod or suction Cup Mount

1. The camera has a standard tripod thread (1/4"-20) embedded into the camera body.

This is the same thread as the one used to attach the universal clip, and used in

nearly every camera accessory available.

2. Thread the camera onto a tripod, camera mount or suction mount (not included), or

any other mount with a standard camera thread.

Tips on Mounting the Camera:

• Great video footage generally features

another person or object. In skiing or

snowboarding this could be the skier in

front, or your own skis. In motorsports,

this can be the fairing of a bike or a car

bonnet. If your object is moving too,

like a wheel or bike pedals, so much

the better. Experiment to find the most

exciting shots.

• Your camera doesn't necessarily

have to face forward. A classic POV

video technique is the direct user

shot. For example in mountain biking,

try mounting the camera on the

handlebars and pointing it back at the

user - It makes for some great action

footage.

• If your activity allows, mount the

camera in different positions between

shots. Then, when editing your video

later you can cut between various

angles to make something truly

special. Some pros use more than one

camera so they can shoot multiple

angles at the same time.

• The lens of the Drift HD can be rotated

to help you align your shots. Please

refer to the lens rotation section on

page 12 for further information.

! However you choose to mount your

camera, ensure that the camera is fitted

firmly to reduce the risk of losing it. Give

it a tug before you set out, just to make

sure.

Autogood products «130»