DRIFT HD 사용자 설명서 - 페이지 9

{카테고리_이름} DRIFT HD에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DRIFT HD 19 페이지.
DRIFT HD에 대해서도 마찬가지입니다: 사용자 설명서 (17 페이지)

페이지 인쇄

using the camera

a) ChanGinG The ReCoRD MoDe

In order to switch between recording video and shooting photos, you will need to

change the camera Record Mode in the Video Configuration Menu.

1. Press the MENU button to open the Main Menu.

2. Use the UP and DOWN buttons to highlight the Video Configuration icon, and press

the SELECT button.

3. The screen will show a list of settings. Highlight the Record Mode option and press

the SELECT button.

4. Highlight the icon of the Record Mode you wish to use and press the SELECT button

again.

5. Press the MENU button twice to return to Live Preview mode.

Note: The camera must be in Live Preview mode to record any video or take any

photos. The MENU button also functions as a BACK button. Press the MENU button a

few times to return to Live Preview mode.

b) ViDeo MoDe

When the camera is in Video mode, the screen will display a live preview image from

the camera lens and a number of icons indicating the camera's status.

Recording Video

1. Ensure that the camera has been set to Video Mode using the Video Configuration

menu.

2. To start recording, press the SELECT button on the camera or the RECORD button

on the remote control. The unit will beep and the LED will turn red.

3. To stop recording, press the SELECT button again, or the STOP button on the

remote. There will be another beep and the LED will return to green.

Note: If the SD card runs out of space while recording, the camera will stop recording

but it will remain switched on. You will need to turn it off yourself unless Camera

Auto-Off has been enabled (page 19).

Note: If the video being recorded is very long, the video file will be separated into

multiple files every 3.6 GB (i.e. every 40 minutes in 1080p). This is automatic – you do

not need to monitor this process. The camera will resume filming after a few seconds,

once the file is saved. Please be patient while the file is saving.

b) PhoTo MoDe

When the camera is in Photo mode, the screen will also display a live preview image,

but the camera status icons are slightly different.

Taking Photos

1. Ensure that the camera has been set to Photo mode using the Video Configuration

menu.

Video Configuration

1/2

Record Mode

Resolution: 1080P

Frame Rate: 30

Exposure: 0.0

Outdoor / Indoor

Video Configuration

1/2

Resolution: 1080P

Frame Rate: 30

Exposure: 0.0

Outdoor / Indoor

Mode Indicator

Remaining Memory

00.00.02

Remaining Battery

Recording Indicator

Autogood products «130»

2. Press the SELECT button on the camera or the RECORD button on the remote

control. The unit will beep once and the LED will briefly turn red.

3. Once the LED returns to green, the camera is ready to take another photo.

D) TiMe-laPse MoDe

Taking Time-lapse Photos

The Drift HD includes a time lapse mode. When activated, the camera will take a

photo every few seconds until it is stopped or the memory card is full.

1. Ensure that the camera has been set to Time Lapse mode using the Video

Configuration menu.

2. Press the SELECT button on the camera or the RECORD button on the remote

control. The unit will beep once and the LED will briefly turn red.

3. The camera will take photos every 3 seconds by default.

Note: You can change the time interval between time-lapse photos by modifying the

Sequence Interval setting as described below.

Changing the sequence interval

1. Press the MENU button to open the Main Menu.

2. Use the UP and DOWN buttons to highlight the Video Configuration icon, and press

the SELECT button.

3. The screen will show a list of settings. Highlight the Sequence Interval option and

press the SELECT button.

4. Use the UP and DOWN arrows to choose the desired time interval and press the

SELECT button to confirm.

Note: The Sequence Interval setting can only be changed when the record mode is

set to Time-Lapse. The available Sequence Interval settings are 3 seconds, 5 seconds,

10 seconds and 30 seconds.

e) ZooM

The Drift HD includes a digital zoom function that allows you to take close-up photos

and videos. To use it, press and hold the UP arrow to zoom in, and the DOWN arrow

to zoom out.

Note: You can zoom in and out while video recording is in progress

Note: The zoom indicator bar may disappear when it is not in use.

Note: Please be aware that using the digital zoom may affect the image quality of your

recording.

Remaining Battery

Shots Remaining

Zoom Indicator