Electrolux WHL6030CN 사용자 설명서 - 페이지 6

{카테고리_이름} Electrolux WHL6030CN에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WHL6030CN 29 페이지.
Electrolux WHL6030CN에 대해서도 마찬가지입니다: 설치 매뉴얼 (12 페이지), 설치 매뉴얼 (12 페이지)

페이지 인쇄

www.electrolux.com

4. CONTROLS

Button Led

Function

Turns the lights on/off at maximum strength.

Fixed

Turns the motor on/off at speed one.

Fixed

Turns the Motor on at speed two.

Press and hold the button for approximately 3 seconds, with all the lo-

ads turned off (Motor and Lights), to turn the Activated Charcoal Filter

alarm on. The relevant LED flashes twice to confirm.To turn the alarm

off, press the button again and hold for at least 3 seconds. The relevant

LED flashes once.

Fixed

Turns the Motor on at speed three.

Press and hold the button for approximately 3 seconds, with all the lo-

ads turned off (Motor and Lights), to perform a reset of Filter saturation

alarm. The LED S1 flashes three times.

Flashing Turns the Motor on at INTENSIVE Speed.

This speed is timed to run for 6 minutes. At the end of this time, the

system returns automatically to the speed that was set before. If it is

activated with the motor turned off, the hood will switch to OFF at the

end of the time.

Press and hold for 3 seconds to enable the remote control, indicated

by the LED flashing twice.

Press and hold for 3 seconds to disable the remote control, indicated

by the LED flashing just once.

Fixed

Signals the Metal Grease Filter saturation alarm, indicating that it is

necessary to wash the filters. The alarm is triggered after the Hood has

been in operation for 100 working hours.

Flashing When this is activated, it signals the Activated Charcoal Filter satura-

tion alarm, indicating that the filter must be changed; the Metal Grease

Filters must also be washed. The Activated Charcoal Filter saturation

alarm comes into operation after the Hood has been working for 200

hours.