Electrolux WRH605I Series 사용자 설명서 - 페이지 4
{카테고리_이름} Electrolux WRH605I Series에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WRH605I Series 12 페이지. Retractable
Electrolux WRH605I Series에 대해서도 마찬가지입니다: 사용 설명서/설치 지침 (12 페이지), 운영 매뉴얼 및 설치 매뉴얼 (12 페이지)
페이지 인쇄
4
INSTALLATION
Standard ducting installation
The rangehood must be positioned at a minimum
clearance of 600mm for an electric cooktop and 650mm
for a gas cooktop. the rangehood should be no further
than 800mm from the cooktop, otherwise the unit
becomes less effective as the distance from the cooking
surface to the rangehood increases.
underside of
rangehood
top of cooking
surface
Fixing point dimensions – 600mm
REHR6* WRH605I* WRH608I*
ø
WRR614SA
ø
if the cooktop
manufacturer
specifies
a greater
600
650
clearance
then that
must be used
121
121
Fixing point dimensions – 900mm
ø 121
WARNING!
Failure to install the screws or fixing device in
accordance with these instructions may result in
electrical hazards.
Ducting installation
When installing with ducting pipe the Duct spigot must
be fitted to the ducting hole on top of the body of the
rangehood.
Recirculating installation
(For Models: WRH608I* WRR614*A & WRH908I*)
When installed in recirculating mode the ducting hole
cover must be fitted.
Parts supplied with hood
1 × Duct Spigot
1 × Ducting hole cover (only for WRH608I*
WRR614*A and WRH908I*)
4 × M6 × 40 screws
4 × Ø6 washers
2 × Carbon filters (only for WRR614*A)
Parts to be purchased
•
Aluminium tape or cable ties to secure flue pipe
•
Custom drawer fascia (if required)
•
Ducting accessories
Duct Spigot
Ducting hole cover