Electrolux WRH908I Series 사용 설명서/설치 지침 - 페이지 3

{카테고리_이름} Electrolux WRH908I Series에 대한 사용 설명서/설치 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux WRH908I Series 12 페이지. Retractable
Electrolux WRH908I Series에 대해서도 마찬가지입니다: 사용자 설명서 (12 페이지), 운영 매뉴얼 및 설치 매뉴얼 (12 페이지)

페이지 인쇄

INSTALLATION INSTRUCTIONS

Please read instructions carefully. Service calls resulting from incorrect installation will be charged for.

Exhaust air from the Rangehood must not be discharged into any heating ﬂ ue which may carry

combustion products from other sources. In addition, exhaust air must not be discharged into a wall

cavity, unless the cavity is designed for the purpose. Adequate ventilation of the room must

be ensured when the Rangehood is operating simultaneously with appliances burning gas or

other fuels. Installation must comply in all respects with your gas and electrical authorities. This

Rangehood is an indoor domestic appliance, and has been manufactured and tested to comply with

Australian and New Zealand Standard AS/NZS 3350.2.31

It is recommended that the unit be positioned as close as possible to 600mm (electric hobs),

650mm (gas hobs), and no further from the hob than 800mm. The unit becomes less effective

as the distance from the cooking surface to the hood increases.

FIXING POINT DIMENSIONS - 600mm Retractable cooker hood

FIXING POINT DIMENSIONS - 900mm Retractable

cooker hood

The maximum space between the wall and screw cap is 5mm.

13427_Rangehood_Electrolux.indd 3

DUCTING INSTALLATION

When installing with ducting pipe the Duct

spigot must be fitted to the ducting hole

on top of the body of the cooker hood

RECIRCULATING INSTALLATION

(For Models: WRH608, RRE634, RRE635, WRH908

& RRE934)

When installed in recirculating mode the

ducting hole cover must be fitted

OPERATION GUIDE & INSTALLATION INSTRUCTIONS

650

600

Duct Spigot

Ducting hole

cover

3/11