Electrolux ZHT 510 설치, 사용 및 유지보수 핸드북 - 페이지 5

{카테고리_이름} Electrolux ZHT 510에 대한 설치, 사용 및 유지보수 핸드북을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux ZHT 510 10 페이지.

Part 1 - INSTALLATION INSTRUCTIONS

1 - Fixing with screws

Using the cardboard template,

mark and drill the holes on the

wall (2 holes Ø 8 mm see

instructions on the template),

insert the plugs in the holes,

tighten both 4,2 x 44,4 screws

(supplied) leaving about 5 mm

unscrewed, hook the hood onto

the screws (fig. 1) and secure

tightly from inside (fig. 2). Mount

the safety square (supplied) above

the hood (fig. 3).

2 - Fixing with brackets

Using the cardboard template,

mark and drill the holes on the wall

(4 holes Ø 8 mm see instructions

on the template), fix the metal

brackets with screws and plugs

(supplied), hook the hood onto the

brackets (fig. 4). Fix the hood with two knobs (supplied) (fig. 5). Make sure the hood

is level and, if necessary, adjust by acting upon the adjustment screws (fig. 6).

3 - Respect warning 2.5.

401_05a

3 3

5 5

1 1

2 2

4 4

6 6