3M 6239303 설치 및 작동 지침 매뉴얼 - 페이지 8

{카테고리_이름} 3M 6239303에 대한 설치 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. 3M 6239303 20 페이지. Reverse osmosis system

Wall Mounting the ScaleGard

(Mounting Template included with unit)

1. Draw a level line on the wall where the bracket is to be mounted. Hold bracket key holes on level line and mark locations for screws.

2. Install mounting screws (not included) into each of the initial key holes as shown in fi gure 2. Be sure to leave 1/8" to 1/4" (0.3 to 0.6 cm) space

between the bottom of the screw head and the wall so that the bracket can be hung. (assume system weight of 57 lbs. (25.9 kg))

To reduce the risk associated with property damage due to water leakage or fl ooding:

• Mount ScaleGard

of installation. Ensure that the location and fasteners will support the weight of the system when installed.

• Allow a minimum of 3" (7.62 cm) clear space under fi lter to facilitate cartridge change.

3. Hang manifold from the mounting screws.

4. Once the bracket is hung, tighten the mounting screws so that the bracket is snug between the screw and the wall.

5. Install remaining mounting screws in locations as shown in fi gure 2.

Figure 2 — Installing Mounting Screws

HP Base Unit

HP base unit in such position as to prevent it from being struck by other items being used in the area

MOUNTING HOLES

NOTICE

IMPORTANT NOTES

MOUNTING HOLES

Operational weight - 57 lbs.