Bosch BBHMOVE4 사용 설명서 지침 - 페이지 10

{카테고리_이름} Bosch BBHMOVE4에 대한 사용 설명서 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Bosch BBHMOVE4 39 페이지.

페이지 인쇄

Figure

To charge the handheld vacuum cleaner, insert it into

the handstick vacuum cleaner and lock into place.

Make sure it is correctly seated.

Cleaning the filters

As far as possible, the dust container should be

emptied every time after vacuuming.

Figure

Remove the handheld vacuum cleaner from the

handstick vacuum cleaner (see Figure 11)

Using the release button, unlock the dust container

and withdraw it from the suction unit.

Figure

Using the handle, remove the dirt filter and cloth

filter from the dust container and clean them by

tapping out or brushing out the dirt with the brush

provided.

Figure

Empty the dust container.

If heavily soiled, the filters and dust container can be

washed out.

Then wipe out the dust container with a dry cloth.

Allow the filters to dry completely before refitting.

Figure

a)Insert the dirt filter and cloth filter into the dust

container.

b) Fit the dust container onto the suction unit and lock

into place.

Filters can be obtained from our after-sales service as

required

Cleaning the floor tool

Figure

The floor tool should be cleaned at regular intervals.

To clean it, release the floor tool from the handstick

vacuum cleaner. (see Figure 5)

Cut through threads and hairs wound round the

rollers using scissors.

Vacuum threads and hairs with the crevice nozzle.

Care

Before cleaning, the handheld vacuum cleaner or hand-

held appliance must be switched off and disconnected

from the charger. They can be cleaned using an ordinary

cleaning agent for plastics.

Do not use a scourer, glass-cleaning agent or all-

purpose cleaning product. Never immerse the vacuum

cleaner in water

Battery disposal

Before disposing of the appliance, please remove the

battery cartridge and dispose of it separately.

Figure

Slide open the battery compartment in the direction

of the arrow.

Cut through the retaining tape and remove the

battery cartridge from the appliance.

Cut through the power cables and to ensure safety,

bind and insulate each of the cable ends with tape.