Electrolux EL6986A 사용 설명서 - 페이지 14

{카테고리_이름} Electrolux EL6986A에 대한 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Electrolux EL6986A 20 페이지.
Electrolux EL6986A에 대해서도 마찬가지입니다: 매뉴얼 (11 페이지)

English

CLEANING THE HOSE AND NOZZLE

The vacuum cleaner stops automatically if the nozzle,

tube hose or filters and s-bag™ becomes blocked. In such

cases, disconnect from outlet and allow to cool for 20-30

minutes. Clear blockage and/or replace filters and s-bag™

and restart.

Tubes and hoses

Use a rod or similar to clear the tubes and hose.

It may also be possible to remove the obstruction in

the hose by squeezing it. However, be careful in case

the obstruction is caused by glass or needles caught

inside the hose.

Note: The warranty does not cover any damage to the hose

caused by cleaning it.

Cleaning the floor nozzle

To avoid deterioration of suction power, frequently

clean the carpet/hard floor nozzle. The easiest way to

clean it is by using the hose handle.

Press each wheel-hub and pull off the wheels.

Remove dust-balls, hair or other objects that may be

entangled. Use the crevice nozzle to clean the wheel

axles. Replace the wheels by pressing them onto the

axles.

Larger objects can be accessed by removing the con-

nection hose (press the small catches located on each

side and simultaneously draw the connection tube

outwards in an upright position).

Remove the object(s) and replace the connection

hose.

Cleaning the turbo nozzle

Disconnect the nozzle from the vacuum cleaner tube

and remove entangled threads, etc. by snipping them

away with scissors. Use the hose handle to clean the

nozzle.