Absara Audio 1695T Black Magick 사용자 설명서 - 페이지 5
{카테고리_이름} Absara Audio 1695T Black Magick에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Absara Audio 1695T Black Magick 8 페이지.
2.2
Rear Panel
8 ohm MAIN
Speaker output for the amplifier. Connect the internal speaker here. Maximum output is 24 Watts
into 8 Ohms.
8 ohm EXT
Extension Speaker output. Connect an 8 ohm extension cabinet to this jack. This jack is designed to
switch to the 4 ohm tap on the output transformer, to accommodate two 8 ohm speakers in parallel.
Do not plug the internal speaker into this jack. Do not use this jack by itself with an 8 ohm
speaker
IEC POWER CORD RECEPTACLE / Fuse holder
The power cord connects here and to your country's appropriate wall outlet. Make sure to connect
the male end of the IEC POWER CORD into a Grounded Power Outlet. This IEC connector contains
the AC Mains fuse. This is a 20mm, T2.5A250V Fuse.
2.3
Setting Tones
The two channel preamp found in your Supro Black Magick is designed to provide a wide variety of
sounds, from clean to mean and everything in between. Begin by setting the volume knobs to 9:00
and the tone knob to 12:00.
Plugging into the first input, labeled "IN 1+2", sends your guitar signal into both channels simultane-
ously. This clever approach combines both preamps in parallel for double the signal power and gain.
Using the IN 1+2 results in a thicker overall texture. A good starting point is setting the volume
controls to 12:00, the tone knob to 12:00 to achieve a massive, wide-range sound that combines both
preamps. Plugging into the second input, labeled "IN 2", sends your guitar signal through channel 2
only. This is the authentic Supro sound. This input path provides the most headroom and vintage
mojo.
Plugging separate instruments into each input will separate the two channels, providing independent
control of volume and tone for each instrument.
Using a simple A/B switch, you can plug a single instrument into both inputs to achieve (phase
coherent) channel switching in its purest form. Try turning the volume of channel 1 to 12:00 while
cranking the volume on channel 2 all the way up to be used as a lead channel.
The tremolo effect is applied at the output stage and modulates the amplitude of the audio signal
coming from both preamps. Adjust speed and depth to taste.
Supro amplifiers are some of the most dynamically sensitive guitar amplifier ever designed. The player
is able to access a myriad of sounds within this amplifier by turning the volume(s) up to the point of
glorious overdrive and simply controlling the strength of the signal right from the volume knob on the
guitar.
4