Drill Master 40070 사용 설명서 및 안전 지침 - 페이지 2
{카테고리_이름} Drill Master 40070에 대한 사용 설명서 및 안전 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Drill Master 40070 12 페이지. Orbital hand sander
Drill Master 40070에 대해서도 마찬가지입니다: 조립 및 작동 지침 매뉴얼 (13 페이지)
페이지 인쇄
Safety .................................................2
Specifications .....................................8
Setup ..................................................8
Operation ............................................9
IMpORTANT SAFETy INFORMATION
General power Tool Safety Warnings
Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury.
Save all warnings and instructions for future reference.
The term "power tool" in the warnings refers to your mains-operated (corded) power tool.
Work Area Safety
1. Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
2. Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust.
Power tools create sparks which
may ignite the dust or fumes.
Page 2
Table of contents
WARNING SyMBOLS AND DEFINITIONS
This is the safety alert symbol. It is used to alert you to
potential personal injury hazards. Obey all safety messages
that follow this symbol to avoid possible injury or death.
Indicates a hazardous situation which, if not avoided,
Indicates a hazardous situation which, if not avoided,
could result in death or serious injury.
Indicates a hazardous situation which, if not avoided,
could result in minor or moderate injury.
Addresses practices not related to personal injury.
For technical questions, please call 1-800-444-3353.
Maintenance ......................................10
Parts List and Diagram ......................11
Warranty ............................................12
will result in death or serious injury.
3. Keep children and bystanders
away while operating a power tool.
Distractions can cause you to lose control.
Item 40070