Atlas AH 소유자 매뉴얼 - 페이지 8
{카테고리_이름} Atlas AH에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas AH 12 페이지. Ah series 3-way loudspeaker systems
페이지 인쇄AH Series 3-Way Loudspeakers
Owner's Manual
Amplifier Considerations
Consult your amplifier owner's manual to confirm power output at the rated impedance.
AH Series 3-Way models used in 8Ω configuration
Each model exhibits an 8Ω (nominal) impedance.
(x2) AH models paralleled will present a 4Ω load to the amplifier.
(x3) AH models paralleled will present a 2.66Ω load to the amplifier.
(x4) AH models paralleled will present a 2Ω load to the amplifier.
ATLAS SOUND speaker system specifications list RMS power handling.
As a reference peak power = RMS x 1.414.
These ratings should be considered in selecting the best amplifier to power the speaker system.
For general use, amplifier output should match or exceed the RMS rated power of the speaker system.
For increased headroom and dynamic reproduction, the amplifier's output should match or exceed the peak power rating of the speaker
system.
In situations where experienced professionals are operating the speaker system with proper limiting and frequency control devices
inserted into the signal path and adjusted properly, amplifier output capacity may meet, but should not exceed 2x the RMS power rating
of the speaker system (750 Watts RMS for the AH Series 3-Way models).
Utilizing the Atlas Sound model CP700 power amplifier will allow you to easily match required power ratings for most installations.
Visit www.AtlasSound.com for more details on this product.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
AtlasSound.com
– 8 –
Specifications are subject to change without notice.