Atlas AH5040S 설치 지침 매뉴얼 - 페이지 3

{카테고리_이름} Atlas AH5040S에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas AH5040S 12 페이지. High-performance, constant directivity, 8", 12", and 15", two-way, indoor/outdoor loudspeaker systems ah series
Atlas AH5040S에 대해서도 마찬가지입니다: 브로셔 (10 페이지), 제품 정보 (4 페이지), 사용 설명서 (12 페이지)

페이지 인쇄

1. Speaker Cable Recommendations and Connection

AH SERIES LOUDSPEAKERS

8", 12", AND 15"

SAFETY INSTRUCTIONS

Please Read Carefully Before Installing or Operating

• Read all instructions carefully

• Heed all warnings

• Assure that the speaker is securely mounted

Hearing Damage

CAUTION: All professional loudspeaker systems are capable of generating very high sound pressure

levels. Use care with placement and operation to avoid exposure to excessive levels that can cause

permanent hearing damage.

SUSPENSION & MOUNTING

Suspension or "ﬂ ying" speaker systems requires training and expertise. Improper rigging of a ﬂ ying

speaker may result in injury, death, equipment damage, and legal liability. Installation must be carried

out by fully qualiﬁ ed installers, in accordance with all required safety codes and standards at the place of

installation.

A 5:1 design factor is a generally accepted minimum standard. However, legal requirements for overhead

suspension vary by municipality, please consult your local safety standards ofﬁ ce before installing any

product. We also recommend that you thoroughly check any laws and bylaws prior to installation.

Loudspeakers ﬂ own in theaters, nightclubs, conference centers, or other places of work and

entertainment must be provided with an independent, correctly rated and securely attached secondary

safety — in addition to the principle suspension point(s). This secondary safety must prevent the

loudspeaker from dropping more than (6") should the principle suspension device fail. If you lack the

skills, training, and proper ancillary equipment to ﬂ y a speaker system, do not attempt to do so.

For additional information regarding the suspension of loudspeakers or to purchase rigging materials,

please contact our friends at

ATM Group, Inc.,1635 E. Burnett St. Signal Hills, CA 90755.

www.atmﬂ yware.com

Telephone (562) 424-1100 and Fax (562) 424-3520

• Always assure power is off to ampliﬁ ers before making any connections

• Assure that all electrical equipment is properly grounded

• Keep instructions for future reference

• Should any questions arise after reading this document, please call Atlas Sound Tech Support at

800-876-3333

1601 JACK MCKAY BOULEVARD ENNIS, TEXAS 75119 U.S.A. •

INSTALLATION INSTRUCTIONS

Specifications are subject to change without notice

AtlasSound.com

Printed in U.S.A.

TELEPHONE: (800) 876-3333 • FAX: (800) 765-3435

000606

ATS002386 RevA 6/06