Atlas PM8CX 설치 지침 매뉴얼 - 페이지 6
{카테고리_이름} Atlas PM8CX에 대한 설치 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas PM8CX 7 페이지. Pedant mount loudspeakers 4" and 8"
Atlas PM8CX에 대해서도 마찬가지입니다: 설치 지침 매뉴얼 (12 페이지), 브로셔 (2 페이지), 사양 시트 (3 페이지), 설치 지침 매뉴얼 (19 페이지)
페이지 인쇄
Suspended Installation Via Down Pipe (Not-Included) Using
Atlas Sound's PM series speaker may also be installed using industry standard ceiling fan hardware. This hardware is available at most
local hardware stores. Using this type of installation allows speaker cable and safety cable to be concealed with the down pipe providing a
very clean installation.
1. R emove the 3 top cover mounting screws, loosen the 2 side top cover screws rotate the top cover counterclockwise, and pull up to remove
the top cover. (Figure 1 and 2)
2. Locate suitable support structure in the area the speaker is to be installed.
3. Mount the ceiling mount canopy and down pipe per manufacturer instructions.
4. S crew the PM speaker top cover onto the bottom of the down pipe, install the safety screw though the side of the top cover and through
the end of the down pipe. (Figure 9)
5. R oute the bare end of the safety cable though the included clamp, then around a suitable support structure, and back through the clamp.
(Figure 3 and 4)
6. R oute the eyelet end of the safety cable through down pipe and the cover of the PM speaker, attach the eyelet to one of the smaller
mounting holes on the support plate of the PM speaker with the included mounting screw. (Figure 9)
7. Route the speaker cable through the down pipe and connect to the appropriate terminals.
8. P osition the speaker under the top cover, align the side cover screws and rotate the speaker clockwise to align the top cover mounting
screw holes. Reinstall the 3 mounting screws, tighten and tighten the side cover screws. (Figure 9)
1601 JACK MCKAY BLVD.
ENNIS, TEXAS 75119 U.S.A.
PM Series
Pendant Mount Loudspeakers
TELEPHONE: (800) 876-3333
FAX (800) 765-3435
⁄
" Diameter Ceiling Fan Hardware
3
4
Figure 9
6/7
AtlasSound.com