Atlas Copco 180PS 안전 및 작동 지침 매뉴얼 - 페이지 7

{카테고리_이름} Atlas Copco 180PS에 대한 안전 및 작동 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco 180PS 19 페이지. Handheld pneumatic breakers

페이지 인쇄

Safety and operating instructions

WARNING Dust and fume hazard

Dusts and/or fumes generated or dispersed when

using the machine may cause serious and permanent

respiratory disease, illness, or other bodily injury (for

example, silicosis or other irreversible lung disease

that can be fatal, cancer, birth defects, and/or skin

inflammation).

Some dusts and fumes created by drilling, breaking,

hammering, sawing, grinding and other construction

activities contain substances known to the State of

California and other authorities to cause respiratory

disease, cancer, birth defects, or other reproductive

harm. Some examples of such substances are:

Crystalline silica, cement, and other masonry

products.

Arsenic and chromium from chemically-treated

rubber.

Lead from lead-based paints.

Dust and fumes in the air can be invisible to the

naked eye, so do not rely on eye sight to determine

if there is dust or fumes in the air.

To reduce the risk of exposure to dust and fumes,

do all of the following:

Perform site-specific risk assessment. The risk

►

assessment should include dust and fumes

created by the use of the machine and the

potential for disturbing existing dust.

Use proper engineering controls to minimize the

►

amount of dust and fumes in the air and to

minimize build-up on equipment, surfaces,

clothing, and body parts. Examples of controls

include: exhaust ventilation and dust collection

systems, water sprays, and wet drilling. Control

dusts and fumes at the source where possible.

Make sure that controls are properly installed,

maintained and correctly used.

Wear, maintain and correctly use respiratory

►

protection as instructed by your employer and as

required by occupational health and safety

regulations. The respiratory protection must be

effective for the type of substance at issue (and if

applicable, approved by relevant governmental

authority).

Work in a well ventilated area.

►

If the machine has an exhaust, direct the exhaust

►

so as to reduce disturbance of dust in a dust filled

environment.

Operate and maintain the machine as

►

recommended in the operating and safety

instructions

TEX 140PS, 150PE, 180PS, 190PE, 220PS, 230PE,

Select, maintain and replace consumables/

►

working tools/ other accessory as recommended

in the operating and safety instructions. Incorrect

selection or lack of maintenance of consumables/

inserted tools/ other accessories may cause an

unnecessary increase in dust or fumes.

Wear washable or disposable protective clothes

►

at the worksite, and shower and change into clean

clothes before leaving the worksite to reduce

exposure of dust and fumes to yourself, other

persons, cars, homes, and other areas.

Avoid eating, drinking, and using tobacco products

►

in areas where there is dust or fumes.

Wash your hands and face thoroughly as soon as

►

possible upon leaving the exposure area, and

always before eating, drinking, using tobacco

products, or making contact with other persons.

Comply with all applicable laws and regulations,

►

including occupational health and safety

regulations.

Participate in air monitoring, medical examination

►

programs, and health and safety training programs

provided by your employer or trade organizations

and in accordance with occupational health and

safety regulations and recommendations. Consult

with physicians experienced with relevant

occupational medicine.

Work with your employer and trade organization

►

to reduce dust and fume exposure at the worksite

and to reduce the risks. Effective health and safety

programs, policies and procedures for protecting

workers and others against harmful exposure to

dust and fumes should be established and

implemented based on advice from health and

safety experts. Consult with experts.

Residues of hazardous substances on the

►

machine can be a risk. Before undertaking any

maintenance on the machine clean it thoroughly.

WARNING Projectiles

Failure of the work piece, of accessories, or even of

the machine itself may generate high velocity

projectiles. During operating, splinters or other

particles from the working material may become

projectiles and cause personal injury by striking the

operator or other persons. To reduce these risk:

Use approved personal protective equipment and

►

safety helmet, including impact resistant eye

protection with side protection.

Make sure that no unauthorised persons trespass

►

into the working zone.

Keep the workplace free from foreign objects.

►

Ensure that the work piece is securely fixed.

►

270PS, 280PE