Atlas Copco 4221000272 제품 지침 - 페이지 6

{카테고리_이름} Atlas Copco 4221000272에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco 4221000272 20 페이지.

Product Information

Output A: Output signal terminal:

■

Outputs A3 and A4: Switch on signal outputs. A3 and A4 will not export any voltage conduct sig-

nal when the tool is switched on.

■

Outputs A1 and A2: Switch off signal outputs. When the tool has reached its set torque and

stopped, no voltage conduct signal will be exported.

■

No voltage conduct signal will be exported at a high voltage specification (DC 24 V/400 mA).

JP-A: External controller use terminal:

■

Outputs A5 and A6: Start signals for automation only.

■

For forward direction, use the external controller to check the conduction between the power

adapter and the screwdriver.

Speed Setting

To modify the speed, turn the speed setting screw on the side of the power adapter with a screwdriver:

■

To increase the speed, turn the speed setting screw clockwise (0 - 10) on the scale.

■

To decrease the speed, turn the speed setting screw counterclockwise (10 - 0) on the scale.

S8020-WS