ABSCO SHEDS 15081SECO 조립 지침 매뉴얼 - 페이지 7

{카테고리_이름} ABSCO SHEDS 15081SECO에 대한 조립 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS 15081SECO 17 페이지. Eco shed

ABSCO ASSEMBLY INTRODUCTION

The snap-tite assembly system locks most perimeter channels to all roof and wall

sheets without the need for tools and fasteners.

PUSH

Position sheets on timbers,

trestles or partly over edge of

concrete slab.

FASTENING SYMBOLS

Join components together by pre-drilling the holes

first. Use one component as a template to mark where

the holes are. Drill with 3mm drill bit.

Join components together with one screw at this

location only, as some channel sections have extra

holes that are not required for this model of garden

shed

Do not join components together at this location yet,

as the screw may obstruct further assembly of other

components

ABSCO INDUSTRIES

Absco ECO Shed

Model: 15081SECO

To pre-assemble the four wall panels

and two roof panels, the perimeter

channels are secured to the top and

bottom of each panel using the

snaptite system, as detailed on the

following pages wherever you see

the symbol.

SNAP

T TE

PUSH

ASSEMBLY INSTRUCTION - MODEL: 15081S 22/10/13

After joining sheets together,

position channel over one end of the

sheets, gently tapping it over the

snaptite lugs, working along the

sheets to the other end.

Each perimeter channel must finish flush

with the edges of the sheets. the snap-tite

system allows adjustment for this

process by simply tapping the channel

along the sheets until each end is neatly

flush.

3mm POP RIVETS

4mm NUT & BOLT SET

PAGE 7