Atlas Copco 8433302395 제품 지침 - 페이지 8

{카테고리_이름} Atlas Copco 8433302395에 대한 제품 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco 8433302395 16 페이지. Battery-powered nutrunner

Operation

Tightening

As tightening torque increase the reaction force build up equally. Make sure that the tool is in correct work-

ing order and that the controller is correctly programmed. By doing this you avoid unexpected behavior

from the tool, which may result in operator injury.

Rotation Direction for the Tightening

Check that the tool is in the correct running direction by turning the reverse button or reverse ring :

Pistol Grip Models (with side buttons)

■

Press in the reverse switch on the right hand side of the tool, to set the direction clockwise (CW).

■

Press in the reverse switch on the left hand side of the tool, to set the direction counter clockwise

(CCW).

Pistol Grip Models (without side buttons)

■

Double press the function button on the top of the start trigger to shift the direction between clockwise

(CW) and counter clockwise (CCW).

Angle Models

■

Turn the reverse ring to the right, to set the direction clockwise (CW).

■

Turn the reverse ring to the left, to set the direction counter clockwise (CCW).

Soft Start

The soft start function facilitates the screwhead and thread to reach the snug level. The duration of the

soft start is adjustable.

For further information about tightening, see Power Focus 6000 Configuration manual.

ETP STB34-12-I06