ABSCO SHEDS 15141RK 조립 및 사용 설명서 - 페이지 17

{카테고리_이름} ABSCO SHEDS 15141RK에 대한 조립 및 사용 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. ABSCO SHEDS 15141RK 20 페이지. N3/c1 frame kit

ANCHORING METHODS

Fixing M10 dynabolt requires drilling into the

concrete slab using a masonry bit. Holes must have

a minimum slab edge distance of 60mm.

Bolt and nut through the wall sheet requires the

drilling of a 10mm hole through the wall sheet.

Inside view of typical anchor.

Door stud have a single anchor through a

BKT17. Fixed by four tek screws.

Absco Industries

Assembly Instruction Manual

N3/C1 FRAME KIT

FOR 1.5m WIDE TO

1.5m DEEP MODELS

Model: CYC15

Bolt and Nut*

M10 4.6/S

Steel Angle*

35 x 35 x 3

M10 Dynabolt*

* Denotes hot dip galvanised fi nish

Outside view of typical anchor

12 anchors in total.

3 per wall, spaced evenly.

02/03/2021

Wall Sheet

Slab

1.0