Alert 750R 소유자 매뉴얼 - 페이지 13

{카테고리_이름} Alert 750R에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alert 750R 15 페이지. Remote engine starter with alarm system

페이지 인쇄

(2-second)

1. Screen Lamp ON: Press and hold the

screen lamp will turns on for 5 seconds

2. Power Save Mode: While the power save mode, the LCD remote transceiver uses "0"

current to save the battery power.

Entry: Press & hold the

on the LCD screen to indicate entry the "power save mode".

Exit: Press any button of the LCD remote transmitter to exit the "Power Save Mode".

3. Clear the Flash Icon and Melody Sound: Press the

icon and melody sound on the LCD screen transceiver

4. Stop The Trigger Melody Sound: While triggering the alarm the LCD screen will alert user through

melody sound and flashing trigger icon, press any button on the LCD remote transmitter to stop melody

sound only.

5. Button Lock: It is useful if you want to disable the transmission function of the remote

control temporarily to prevent from any inadvertent pressing of buttons by others. Press

the

button first, within 3 seconds press and hold the

activate or cancel the button lock function, the

to show the LCD remote transmitter is on "Button Lock".

6. Vibration / Melody Mode:

It is useful when you are in a noisy place and difficult to hear beep sound from the

remote control as the remote control in this mode, vibrates itself if your security system is

triggered.

Press the

button first, within 3 seconds press and hold the

seconds to select the mode of vibration or melody, the

LCD screen to show the LCD remote transceiver is on vibration mode.

7. Enable / Disable Bi Sound While Pressing Button:

It has a short "bi" sound while pressing the button of the LCD screen transceiver

If you want mute the "bi" sound mute always while press button. Press the

press and hold the

8. Low Battery Indication:

When the power of the battery weakens, it has two short "bi" sound and flash

the button of the LCD screen transceiver.

9. Set Up Fixed Count Down Timer:

1. Press the

button first, within 3 seconds press and hold the

screen will shows

( )

2. Press the

(ie.0:30).....and so on.

3. Leave the buttons starting count down then

Note: 1.The count down period is fixed as 10 minutes, 20 minutes, 30 minutes, 1 hour, 1.5 hours and 2

hours maximum.

2.When count down timer showing 0:00 means to turn off the timer.

3. Press

button for real time indication when the timer is counting down.

10. Out Of Range Indication:

The system will automatically check the range every 20 minutes after armed.

1. If user is within the range, the

2. If user is out of range, it has five short "bi" sounds and the

750R OP

Enable / Disable Bi Sound

Pressing Button

button one second, with one melody sound and the LCD

button for 5 seconds, with one melody sound and

(Bi)

button for 2 seconds to disable the "bi" sound.

icon and timer (ie. 0:10) ,

button again showing next order time on the screen (ie.0:20), press them again

icon will display on the LCD screen.

(Bi)

While

button 3 times within 3 seconds will clear the flash

( )

button for 2 seconds to

icon will displayed on the LCD screen

(

) button for 2

icon will displayed on the

( )

icon flashes

icon will disappear on the LCD screen.

MAY/03/2004

icon

button first, within 3 seconds

icon while pressing

button for 2 seconds, the LCD