Bose 131 소유자 매뉴얼 - 페이지 11

{카테고리_이름} Bose 131에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose 131 18 페이지. Marine loudspeaker system
Bose 131에 대해서도 마찬가지입니다: 소유자 매뉴얼 (37 페이지), 소유자 매뉴얼 (23 페이지), 서비스 매뉴얼 (7 페이지), 서비스 매뉴얼 (7 페이지), 매뉴얼 (7 페이지)

페이지 인쇄

Installation from the front of the bulkhead

AM188201_02_V.pdf

Installing Your Speakers From The Front Of The Bulkhead

Remove the speaker cone shield from the

A 17

enclosure.

Snap the grille in place on the mounting flange.

A 18

No hardware is needed to secure this part. You

are now finished with the assembly. Enjoy your

music system!

If you cannot reach the mounting area from behind the bulkhead, you will have to

mount the speaker enclosure by inserting it through the front. To do this you will need

a 7

⁄

inch (18 cm) hole, the larger of the two perforated sections on your template.

CAUTION: Determine whether any obstacles exist behind the mounting surface. To

be certain, contact your boat manufacturer or dealer. Also, be certain that the

enclosure will fit within the mounting area before drilling any holes.

Place the template over the area where the speaker

B 1

is to be located. The round outer edge shows how

much room to allow for the grille. The long end is

used to judge the room needed behind the bulkhead.

There are two perforated circles in the template.

Snap out the larger one and mark the 7

cm) hole with a metal scribing tool or pencil.

⁄

inch (18

October 30, 2001