Advanced PureAir Air Shield 소유자 매뉴얼 - 페이지 7
{카테고리_이름} Advanced PureAir Air Shield에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced PureAir Air Shield 17 페이지. State-of-the-art 9-stage air purification system
페이지 인쇄
OPERATING INSTRUCTIONS
Locate the Unit
Place the Air Shield against a wall, near an electric outlet with 12-15 inches clearance on the front and
sides. It is best to place the unit where it will be out of any children's play area.
How to Start
Plug the unit into a standard 120V/60Hz outlet. Press the POWER ON/OFF button. The device starts
operating automatically and the negative-ion UV indicator will automatically turn on. Press POWER ON/OFF
again and the device will turn off.
Fan Modes
This Air Shield has five different fan modes to choose from. Please choose a proper
level of circulation according to indoor air quality and room size. As you press FAN,
the fan mode will change according to the number of times you press the button.
The LED will show the following sequence of modes:
QUIET
Automatic Operation
Keep pressing the FAN button until the device runs under automatic operation
(the LED will show AUTO).
Under automatic operation, the device automatically switches to the proper
running modes (MED or LOW) according to the level of odor, dust, or irritants
in the air as detected by the sensor. As the air is purified, the device will auto-
matically switch back to LOW or QUIET modes.
Timed ON/OFF
Press AUTOTIMER button to set operation timing.
Under the AUTOTIMER function, the operation timing will be set according to
the number of times you press the AUTOTIMER button. The LED will show the
following sequence of timing:
1 HOUR
TM
Advanced PureAir Air Shield Owner's Manual
LOW
MED
2 HOUR
HI
AUTO
8 HOUR
6