Advanced PureAir APA-5050 UV 소유자 매뉴얼 - 페이지 10
{카테고리_이름} Advanced PureAir APA-5050 UV에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced PureAir APA-5050 UV 12 페이지.
페이지 인쇄TROUBLESHOOTING
Problem
Unit will not operate
Smell
Excessive Noise
No air flow
Ineffectiveness
www.AdvancedPureAir.com
All manuals and user guides at all-guides.com
Solution
1. Check if air purifier is properly plugged in
2. Make sure unit is turned ON.
3. Hold down Filter Reset Button.
1. Filter is too dirty because it's not replaced
2. Using the air purifier in moist conditions
3. Using unclean filter for a long time or
4. Abnormal smell - Stop the air purifier
1. Make sure parts are firmly positioned in
2. Open the base cover and make sure that
1. Air purifier being operated in sleep mode -
2. The air purifier is malfunctioning - check
3. Open the base cover and make sure that
1. The filter is blocked and no longer is
2. Being used in wrong environment such as
and powered on.
for a long time - replace the filter.
or water entered the filter - Replace filter.
completely blocked filter - Clean the filter,
if problem is not resolved, replace the
filter.
immediately and turn off the power;
contact our customer service department:
1-888-601-5886.
place.
any plastic packaging was removed from
the filter.
change the mode
power supply if problem still exists,
contact customer service.
any plastic packaging was removed from
the filter.
effective - replace the filter.
an oversized room.
8
1-888-601-5886