Bose Acoustimass 20 소유자 매뉴얼 - 페이지 15
{카테고리_이름} Bose Acoustimass 20에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Acoustimass 20 22 페이지. Powered speaker system
Bose Acoustimass 20에 대해서도 마찬가지입니다: 소유자 매뉴얼 (22 페이지)
Figure 14 a
Setting Zone 2 Protocol
AM262838_00_V.pdf
Setting Zone 2 Protocol
®
For the Acoustimass
5 or 20 powered speaker system to work properly with a Lifestyle
you will need to check the Zone 2 Protocol to ensure that it is set to Normal mode (Figure 14 a).
1. While your Lifestyle
®
system is on, press the Settings button on your remote control. This will open
the on-screen display.
2. Scroll down with the down-arrow button and select System Setup using the Enter button.
3. You will now see a menu entitled System Setup (1 of 3). Scroll down to "more...".
Continue to scroll down through (2 of 3) to (3 of 3). The last item on System Setup (3 of 3) is Zone 2
Protocol.
4. If necessary, use the right-arrow button to set the protocol from Legacy to Normal.
5. If you changed the Zone 2 Protocol, shut off the system and turn it on again; this ensures that the
Zone 2 Protocol is reset to Normal mode.
On
Mute
Mute
Off
All
SOURCE / INPUT
CD/DVD
Changer
FM/AM
TV
VCR
AUX
Settings
MENU / NAVIGATION
Settings
Tune
Disc
Seek
Enter
Channel
Chapter
Volume
Preset
Track
1
2
3
4
5
6
7
8
9
0
PLAYBACK
Stop
Pause
Play
Shuffle
Repeat
Connecting power to your system
CAUTION : If you purchased a dual-voltage system, it is important that you set the speakers to the
correct voltage. To do this, refer to "Selecting the correct voltage" on page 6.
Follow these steps to connect power to your Acoustimass powered speaker system:
1. Plug the power cord from the Acoustimass module into an AC power (mains) outlet.
2. Insert the power cords of the Lifestyle
3. Turn the Acoustimass module power switch to the On position.
Settings ( )
System Setup
Enter
®
system into an AC power (mains) outlet.
December 20, 2001
Setting Up
®
media center,
System Setup (3 of 3)
Zone 2 Protocol:
Normal
13