Bose BoseBuild SPEAKER CUBE 매뉴얼 - 페이지 2

{카테고리_이름} Bose BoseBuild SPEAKER CUBE에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose BoseBuild SPEAKER CUBE 4 페이지.
Bose BoseBuild SPEAKER CUBE에 대해서도 마찬가지입니다: 여기에서 시작 (2 페이지)

페이지 인쇄

BOSEbuild Speaker Cube

Using your speaker cube without the BOSEbuild Sound app

The BOSEbuild Sound app includes step-by-step instructions for pairing and assembling your

speaker cube, as well as activities and tools that help you get the most out of your BOSEbuild

speaker cube. In addition, some features are available without using the app. The following

instructions describe using your speaker cube without the app.

Connecting to AC power

To use your BOSEbuild Speaker Cube, you must connect it to AC power.

1. Plug the small, round end of the power supply cord into the POWER connector on the

Control Panel.

2. Connect the power supply to an AC power outlet.

Pairing a mobile device

When you ﬁrst power on the speaker, it is ready to pair with your mobile device. The Bluetooth

indicator blinks blue, and the voice prompt says, "Ready to pair your BOSEbuild Speaker Cube."

1. On your mobile device, make sure Bluetooth is on. (The Bluetooth menu is usually found in

the Settings menu.)

2. Select your BOSEbuild Speaker Cube from your mobile device' s Bluetooth list.

The Bluetooth indicator glows solid white, and the voice prompt says, "Connected to

<device name>."

Playing music

Once your mobile device is connected, start a music app on the device to play music. You can

use the playback and volume controls on your device to control the music.

Changing the speaker's color

You can use the Power/Mode button and Color Slider to change the color of your speaker.

Note: This feature is only available when the BOSEbuild Sound app is not connected to the

speaker.

Press the Power/Mode button to switch between color modes. Use the slider to adjust the

appearance of each mode. Color modes appear in the following order:

1. Color Picker: The speaker glows a solid color. Use the slider to adjust the color.

2. Rainbow: The speaker scrolls through a rainbow of different colors. Use the slider to adjust

the speed.

3. Dancing Colors: The speaker lights up in response to music. Use the slider to adjust the

colors.

4. Color Off: The speaker' s RGB LEDs are off. Other features continue to operate as normal.

Turning voice prompts off/on

The BOSEbuild Speaker Cube features voice prompts to guide you through the pairing and

connecting processes. Voice prompts also announce the name of the currently connected

device(s).

If you prefer not to hear voice prompts, press and hold the Power/Mode button for 10 seconds.

You will hear conﬁrmation that voice prompts are off. Repeat to turn voice prompts back on.

Note: This feature is only available when the BOSEbuild Sound app is not connected to the

speaker.