Airtecnics K7 HEPA 설치 매뉴얼, 운영 및 유지보수 - 페이지 11

{카테고리_이름} Airtecnics K7 HEPA에 대한 설치 매뉴얼, 운영 및 유지보수을 온라인으로 검색하거나 PDF를 다운로드하세요. Airtecnics K7 HEPA 16 페이지.

The service panel covers the inside of the unit� Through it you can access the fans and the connection

box��

0- Service panel

Before replacing the fan, it is necessary to notify that it is working, disconnect the current, make sure that

there is no voltage and the turbine does not rotate�

Open the service panel as indicated in the previous section�

1- Disconnect the fan power ca-

bles inside the connection box

The new fan is installed following the above procedure in reverse order, making sure that the connection in

the IP box is correct (follow instructions on page 4)�

Service panel opening

1- Remove the screws

Fan replacement

2- Remove the screws

Instruction manual - Purifier

2- Gently remove the

service panel down

3- Remove fan

K7 770 HEPA