Bose FreeSpace 8 설치 관리자 매뉴얼 - 페이지 3

{카테고리_이름} Bose FreeSpace 8에 대한 설치 관리자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose FreeSpace 8 17 페이지.
Bose FreeSpace 8에 대해서도 마찬가지입니다: 설치 관리자 매뉴얼 (23 페이지)

Bose FreeSpace 8 설치 관리자 매뉴얼
Please read this safety information before installing, connecting, or operating the Bose
®
FreeSpace
system controller (Model 8/32).
1.1 Read the instructions – Read and keep all safety and operating instructions.
1.2 Follow cautions – For safety, follow all cautions and warnings in this guide and on
the system controller.
1.3 Avoid moisture – Do not install the controller near water or excessive humidity. Do
not install near swimming pools, spas, dish washing or laundry equipment, or in
other excessively humid environments.
1.4 Avoid heat – Do not install the controller near excessive heat sources, such as
radiators, ranges, grills, fryers, stoves, or other appliances.
1.5 Protect cables – Put cables where they won't be pinched or cut by heavy or sharp
objects.
1.6 Connect the power cord properly – Make sure the controller is properly grounded.
If the power cord includes a ground pin, it should be connected to the ground on the
power outlet.
1.7 Disconnect for service – To reduce the risk of electric shock, disconnect the power
cord before replacing the fuse or when changing the voltage selection. The power
cord must remain disconnected until the fuse holder/voltage selector assembly is
replaced.
1.8 Ventilate equipment racks – If mounting the controller in a rack with heat-produc-
ing electronic equipment, vent the rear of the rack to prevent overheating the
controller.
1.9 If damage occurs – Obtain service from qualified service personnel under the
following conditions:
A. Water or other liquid spills into the controller;
B. If the controller is exposed to rain or water;
C. If the controller does not operate normally, even though you have followed the
instructions in this guide;
D. If the controller exhibits a distinct change in performance.
1.10 Safety check – After service or repairs, ask the service technician to perform safety
checks. This includes properly connecting the safety ground wire to the power
mains connector.
AM177675-2_04_V.pdf • May 7, 2002
1.0 Safety Information
®
3