Advanced Quality Industries IntegrAlarm IA-FOB-1 사용자 및 설치 관리자 설명서 - 페이지 7

{카테고리_이름} Advanced Quality Industries IntegrAlarm IA-FOB-1에 대한 사용자 및 설치 관리자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. Advanced Quality Industries IntegrAlarm IA-FOB-1 8 페이지. 5-function keyfob

페이지 인쇄

Home arming mode. Press HOME again and observe Control Panel

display to ensure that the IntegrAlarm System is disarmed.

• Standing near the Control Panel, press AWAY. Ensure that the LED first

flashes red (indicating transmission to the Control Panel) and then green

(indicating receipt of ACK response from the Control Panel). Observe

Control Panel display to ensure that the IntegrAlarm System enters Away

arming mode. Press AWAY again and observe Control Panel display to

ensure that the IntegrAlarm System is disarmed.

• Telephone the IntegrAlarm Monitoring Station and inform the operator that

the PANIC function is about to be tested. (Note: If you do not do this, the

police or security services will be called!) Now standing near the Control

Panel, press PANIC. Ensure that the LED first flashes red (indicating

transmission to the Control Panel) and then green (indicating receipt of

ACK response from the Control Panel). Telephone the IntegrAlarm

Monitoring Station again to ensure that the call was received.

• Standing near the X-10 or PGM device to be operated, as defined in the

specific IntegrAlarm system (e.g. front gate, outside lighting, etc.), press

AUX. Ensure that the LED first flashes red (indicating transmission to the

Control Panel) and then green (indicating receipt of ACK response from

the Control Panel). Ensure that device operates.

Document # E.0015.16.05

396194