Alert Labs Flowie 빠른 시작 매뉴얼 - 페이지 5
{카테고리_이름} Alert Labs Flowie에 대한 빠른 시작 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Alert Labs Flowie 6 페이지. Water sensor
페이지 인쇄Strap it on
5
Wrap the adjustable band snugly around your water meter and fasten
it. For best results, install your Flowie so that the orange body is
between the inlet and outlet of your water meter.
GOOD
Between inlet
& outlet
Also make sure you install your Flowie as low as you can on the water
meter, while keeping the orange case flat up against the water meter
body. There are lots of different kinds of water meters; here are some
examples showing where to position your Flowie. Check out
alertlabs.com/placemyflowie for more installation information.
GOOD
Low on the meter, orange face flat against the meter
Photos & calibration
6
During the registration process, you will be asked to provide two
photos to ensure a smooth setup. Take these now, before you leave
your installation site.
LESS GOOD
Above inlet
or outlet
BAD
BAD
Too high
Not snug against
the meter
Installation photo
The installation photo should clearly
show your water meter and how the
Flowie is positioned on it. It should look
something like the one shown here.
Dial photo
Take a photo that clearly shows all of the numbers, readings, and
text on the face of your municipal water meter dial. If you have a
digital meter, you may need to press a button or shine a bright light
into the solar panel to get the numbers to show up. You'll need to
use this photo for calibration.
ANALOG
METER
DIAL
Get thee to the internet
7
Now get yourself to an internet-connected device to register your
Flowie. You can register directly from within the Alert Labs app, or
Sign-in
at
alertlabs.com
from your laptop or tablet browser.
Create an Account
if you don't already have one. Then select
Sensor
to get started.
During the registration process, you will be asked for the serial number
of your Flowie which is printed on the box, the instructions sticker, and
on the bottom of the sensor. You will also be asked to provide the
installation and calibration photos you took in step 6.
Now bask in the glory of data
8
That's it. Your installation is complete. Return to your Dashboard at
any time or use our app to check on your property. Since you've just
installed it, your Flowie will need some time to collect data, but as the
hours, days, and months pass you'll be able to see meaningful insights
about your water use and ways to save money.
Even if you never view your Dashboard or app, our servers will alert
you via text message, email, or push notification if anything of concern
happens.
DIGITAL
METER
DIAL
Add
Add Sensor
ALERT LABS | PKG-000010-003