B
S
C
ASIC
YSTEM
ONNECTIONS
Installing the TV on/off sensor
Figure 22
TV on/off sensor installed
on your TV
26
The TV on/off sensor enables the system to automatically turn on the TV, as needed, when
another video source (DVD, cable/satellite box, etc.) is selected. If you choose not to use the
sensor, you need to turn on your TV separately.
For a larger TV, you may want a second person to help as you follow the steps below:
1. Plug the sensor cord connector into the TV SENSOR jack on the media center.
If you are using a SCART adapter, plug the sensor directly into the pass-through
jack provided on the adapter (Figure 14 on page 18).
2. Temporarily position the TV on/off sensor on the back of your TV (Figure 22).
Note: DO NOT attach the supplied mounting strip until you have tested and activated the
automatic feature as explained below.
Sensor
mounting
strips
Note: Mount the sensor on the bottom rear of a projection TV chassis. Front projectors with a
separate screen may not work with the sensor.
3. Turn on your TV to test the sensor and activate the feature.
A. On the LIFESTYLE
to move around the on-screen menu. Press Enter to make selections:
• Move right to Video and press Enter.
• Move down to TV Power and press Enter.
• Move up or down to select the proper TV Power option:
Automatic (for TV models that do not use a European-style SCART
connector).
Euro Connector (for TV models that use a SCART connector).
• Press Enter.
B. On the rear of the TV, move the sensor as needed, and notice when the on-screen
changes from
TV Power Status
C. On the TV screen, move down to
D. Press Exit to leave the System menu. This completes activation.
Français
TV on/off sensor
Rear of TV
®
system remote control, press System and use the arrows
TV not detected
, select
TV Power
Español
Sensor cord
Media center
TV SENSOR
connection panel
jack
to
.
TV ON
and press Enter.
Automatic,
English
페이지 인쇄