Bose MediaMate Computer Speakers 소유자 매뉴얼 - 페이지 7

{카테고리_이름} Bose MediaMate Computer Speakers에 대한 소유자 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose MediaMate Computer Speakers 17 페이지. Mediamate computer speakers
Bose MediaMate Computer Speakers에 대해서도 마찬가지입니다: 소유자 매뉴얼 (16 페이지)

페이지 인쇄
Bose MediaMate Computer Speakers 소유자 매뉴얼
Connect
the speakers
The speaker cable is already attached at one end to the accessory
speaker. Plug the other end into the TO ACCESSORY SPEAKER
jack on the powered speaker (see Figure 4 on page 8).
Note: If the speaker cable is disconnected while the system is
playing, only the powered speaker will continue to play As a
protective feature, neither speaker will play when you reconnect
that cable. To restore sound to both speakers, disconnect and
reconnect the power pack.
How to connect
to the sound
source
You can connect up to two sound sources to MediaMate" speakers
- your computer and an external CD-ROM, for example. While some
CD-ROMs operate through the computer's
sound card, others
have a direct audio output jack. Before making any connections,
consult the owner's manuals for the equipment you will be using, to
familiarize yourself with how it connects.
Use AUDIO INPUTS A for your computer or computer and CD-ROM
combination.
Use AUDIO INPUTS B for an external CD-ROM with
an audio output jack, or for other components.
The sound source connected to B will play through your speakers
simultaneously
with the sound from your computer. Use the source
mixer on the front of the powered speaker to adjust the balance of
sound coming from the two sources.
Two audio input cables are supplied with the speakers. If your
computer has a stereo mini jack, use the cable with a stereo mini
plug. Otherwise, use the cable with RCA plugs on both ends.
Match the colors on the connectors to the colors on the jacks, red
to red and white to white.
Connect the speakers
The speaker cable is already attached at one end to the accessory
speaker. Plug the other end into the TO ACCESSORY SPEAKER
jack on the powered speaker (see Figure 4 on page 8).
Note:
If the speaker cable is disconnected while the system is
playing, only the powered speaker will continue to play As
a
protective feature, neither speaker will play when you reconnect
that cable. To restore sound to both speakers, disconnect and
reconnect the power pack.
How to connect to the sound source
You can connect up to two sound sources to MediaMate® speakers
- your computer and an external CD-ROM, for example. While some
CD-ROMs operate through the computer's sound card, others
have a direct audio output jack. Before making any connections,
consult the owner's manuals for the equipment you will be using, to
familiarize yourself with how it connects.
Use AUDIO INPUTS A for your computer or computer and CD-ROM
combination. Use AUDIO INPUTS B for an external CD-ROM with
an audio output jack, or for other components.
The sound source connected to B will play through your speakers
simultaneously with the sound from your computer. Use the source
mixer on the front of the powered speaker to adjust the balance of
sound coming from the two sources.
Two audio input cables are supplied with the speakers. If your
computer has a stereo mini jack, use the cable with a stereo mini
plug. Otherwise, use the cable with RCA plugs on both ends.
Match the colors on the connectors to the colors on the jacks, red
to red and white to white.
7