Bose Panaray 402 Series IV 설치 매뉴얼 - 페이지 10
{카테고리_이름} Bose Panaray 402 Series IV에 대한 설치 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Bose Panaray 402 Series IV 32 페이지. Full-range-driver array loudspeakers
Bose Panaray 402 Series IV에 대해서도 마찬가지입니다: 설치 매뉴얼 (24 페이지)
페이지 인쇄
- 1. Panaray Series IV Loudspeaker Dimensions
- 2. Series IV Loudspeaker Dimensions
- 3. Panaray 802 Series IV Loudspeaker Mounting Options
- 4. Recommended Power Amplifiers
- 5. Panaray 802 Series IV Loudspeaker Specifications
- 6. Panaray 402 Series IV Loudspeaker Specifications
- 7. Panaray 502 a Series Loudspeaker Specifications
Installation
Place the loudspeaker on the bracket.
5.
Tilt the loudspeaker to the desired angle and insert the second M8 cap screw on each side of the loudspeaker.
6.
Using a 5 mm Allen wrench, tighten all four cap screws to 5.6 Newton-meters (50 inch-pounds).
7.
Connect field wiring and test loudspeaker operation.
8.
SB-8 suspension bracket (for indoor use only)
The SB-8 suspension bracket kit is used for suspension-mounting one 802 loudspeaker. The kit provides 0-45 deg pitch.
10
Wall mount pitch angles
5.6 Nm (50 in-lb)
pro.Bose.com
Ceiling mount pitch angles