Atlas Copco PHE 3 수리 지침 - 페이지 9

{카테고리_이름} Atlas Copco PHE 3에 대한 수리 지침을 온라인으로 검색하거나 PDF를 다운로드하세요. Atlas Copco PHE 3 14 페이지.

Assembly

Note

Please additionally secure all screwed connections in metal with screw locking device.

Mounting the

1 Fit the centering ledges (3) to the field (2)

field

(take care of the right position, see

illustration).

2 Insert the field (2) into the field housing

(1) (lightly hit the field housing with a

plastic hammer).

3 Insert the silicone buffer (4) into the air

supply ring (5).

4 Insert the air deflector plate (5) (take care

of the right position, see illustration).

Assembling and

1 Push the bearing (6), the washer (4) and

mounting the

the seal ring (5) (take care of the right

armature

position: the small boring faces the

toothed gear) onto the armature shaft and

press on the toothed gear (3) as fas as

will go.

2 Insert the complete armature (7) into the

field.

3 Push the silicone buffer (2) onto the field

housing.

4 Fix the angle (1) in the field housing.

5 Push the seal ring (9) onto the field

housing.

Mounting the

1 Insert the motor (4) into the motor

motor

housing (2) (take care of the right

position: the lug (3) must fit into the relief

of the motor housing).

2 Fasten the motor with screws (1) and (5)

(2,5 Nm).

Repair Instruction No. 175.8/95

PHE 3, PHE 3X

PAGE